31A - CUP - 516 S SANTA FE ST - Laserfiche WebLink

Home Browse Search

' - - BENDER READY-MIX CONCRETE MANUFACTURING PROJECT Initial Study/Mitigated Negative Declaration 1 related to hazardous materials safety. In addition, existing and proposed operations associated with the project would not result in significant impacts to surrounding uses in regards to hazardous ' emissions or acutely hazardous materials. Thus, impacts in this regard would be less than significant. Mitigation Measures: No mitigation is required. d) Be located on a site which is included on a list of hazardous materials sites compiled pursuant to Government Code Section 65962.5 and, as a result, would it create a signirrcant hazard to the ' public or the environment? No Impact. The project site is not on a list of known hazardous materials sites.' No known corrective action, restoration, or remediation has been planned, is currently taking place, or has been completed ' on the project site. As stated above in Responses 4.8(a) through 4.8(c), the project is not expected to result in a significant hazard to the public during construction or long-term operations. Thus, no impact would occur in this regard. Mitigation Measures: No mitigation is required. ' e) For a project located within an airport land use plan or, where such a plan has not been adopted, within two miles of a public airport or public use airport; would the project result in a safety hazard for people residing or working in the project area? ' No Im act. The nearest airport to the project site is the John Wayne Airport, located approximately four miles to the south. In addition, the project site is located outside of the John Wayne Airport Influence t Area.2 Therefore, no impact would occur. Mitigation Measures: No mitigation is required. 0 For a project within the vicinity of a private airstrip, would the project result in a safety hazard for people residing or working in the project area? ' No Impact No private airstrips exist in the project vicinity. Thus, no impacts would occur. Mitigation Measures: No mitigation is required. ' g) Impair implementation of or physically interfere with an adopted emergency response plan or emergency evacuation plan? Less Than Significant Impact Asa concrete manufacturing plant, the Bender Ready-Mix facility does not currently impair or physically interfere with emergency plans in the site vicinity. The proposed ' project would implement minor aesthetic, drainage, water quality, and safety improvements on-site. Safety improvements would include the repaving of South Santa Fe Street along the project frontage. Repaving of South Santa Fe Street would be limited to the southbound lane (i.e., from the roadway centerline to the project frontage). Thus, South Santa Fe Street would remain open and accessible during emergency operations. The repaving process would comply with City requirements related to California Department of Toxic Substances Control, http://www.envirostor.dtsc.ca.gov/publictsearch.asp?cmd=search&city= &zip=92705&county=&federal_superfun d=True&state_response=True&voluntary_cleanup=True&school_cleanup=True&permitte d=True&pc-permitted=True&hist_nonoperating=True&correcbve_action =True&tiered_permit=True&displ ay_results=Report&pub ' =True, accessed January 29, 2011. 2 Airport Land Use Commission for Orange County, AELUP Height Restriction Zone forJWA, January 8, 2004. ' JULY 2011 4.8-3 HAZARDS AND HAZARDOUS MATERIALS 31A-63