Laserfiche WebLink
Terminations should be configured for EIAMA 5688. Chatsworth <br />horizontal and vertical cable management panels may also need to be <br />installed in conjunction with patch panels. <br />1.1.4.5.Provide only new and recently manufactured materials for City <br />projects. <br />1.1.4.6.Any defective material or workmanship, as well as damage to existing <br />facilities resulting from the same shall be replaced or repaired at no <br />additional cost to the City. <br />1.2. HORIZONTAL WORK AREA CABLE <br />1.2.1. 100 -Ohm UTP cable: <br />1.2.1.1.Provide all required Avaya 1061 or 2061 (depending upon scope of <br />work), Category 5e, 4 pair, UTP cable. <br />1.2.1.1.1. Color: <br />1.2.1.1.1.1.Voice cable: White <br />1.2.1.1.1.2. Data cable: Blue <br />1.3. BACKBONE CABLE <br />1.3.1. Provide CommScope SYSTIMAX multi -pair, UTP, riser rated, plenum <br />rated cable as needed. <br />1.3.2. Provide CommScope SYSTIMAX non - conductive, riser rated, plenum <br />rated, 900 µm tight buffered, multi -mode or single mode cable as needed. <br />1.4. CONNECTORS <br />1.4.1. UTP Work Area Connectors: <br />1.4.1.1.Data — Provide all required CommScope SYSTIMAX 8 position, 8 <br />conductor Information Outlets to terminate work area end of each <br />Category 5e Blue UTP cable installed. <br />1.4.1.1.1. Information Outlets provided shall support pin /pair assignment <br />Standard 568B. <br />1.4.1.1.2. Color: Blue <br />Page 4 of 24 <br />