Laserfiche WebLink
structural calculations or evaluations for the proposed modifications and submit to the City Building <br />Department for plan check approval, ensuring that all applicable codes are met. These plans <br />and /or shop drawings shall be stamped and signed by a State of California licensed engineer or <br />architect, depending on applicability. Contractor will be responsible for all efforts and coordination <br />required for City approval prior to commencing construction. <br />The proposer shall be responsible for retaining data, records and documentation for the preparation <br />of the required information. These materials shall be made available to the City as requested by <br />the City. <br />All proposed equipment, including software and controls, shall be non - proprietary. The proposed <br />modifications include, but are not limited to, the following: <br />• Controller: <br />• Provide new non - proprietary microprocessor controller <br />• Provide new PC based machine room monitor <br />• Provide new electronic starter with phase overload protection <br />• Provide new emergency battery lowering unit <br />• Provide new hoist way leveling system and mechanical limit switches <br />• Provide all new wiring including machine room, hatch, car and traveling cables <br />• Integrate smoke detector wires into the controller fire recall system and insure proper <br />operation. <br />• Connect the active phone line into the new elevator phone and program to call <br />desired number. <br />• Fixtures: <br />• Provide new Car Operating Panel (COP) in a brushed stainless steel finish, which <br />shall include: <br />— ADA telephone providing hands -free, two -way communication <br />— Emergency light unit <br />— Raised and illuminated pushbuttons with supporting Braille <br />— Certificate frame <br />— All code required car control key- switches <br />— Fire Phase 2 features in required locked cabinet <br />• Provide new hall pushbutton stations, to be surface mounted at required ADA height. <br />Pushbuttons shall match the COP fixture. Fire Phase I key switch with required <br />engraving will be part of the lower terminal recall fixture, with Access switches <br />located at top and bottom landings as required <br />• Provide new digital car position indicator located in the car operating panel, finished <br />in brushed stainless steel <br />• Provide new traveling lantern with electronic chime <br />• Provide jamb braille as required by ADA code <br />• Door Operation: <br />• Retain existing GAL, closed loop, solid state door operator <br />• Refurbish car door hardware only as necessary, which shall include rollers, linkage, <br />gibs. <br />City of Santa Ana RFP 13.038 <br />Page 6 <br />