19E - RFP - PARK MAINT - Laserfiche WebLink

Home Browse Search

2.10 SPECIFICATIONS AND PLANS The work perfonnQd shall be done in accordance with the Standard Specifications for Public Works Construction, latest edition, hereinafter referred to as Standard Specifications, In case of conflict between the Standard Specifications arid this Specification, this Specification shall take precedence over and be used in lieu of such conflicting portions. Where the plans or specifications describe portions of work in general terms, but not complete detail, it is understood that workmanship of the finest quality is to be used. Unless otherwise specified, the Contractor shall furnish all labor, materials, tools, equipment and incidentals and do all the work involved in executing the contract. 2.11 CONSTRUCTION EQUIPMENT The Contractor shall take all necessary precautions for safe operation of his equipment and the protection of the public from injury and damage from such equipment. 2.12 SOUND CONTROL REQUIREMENTS The Contractor shall comply with all local sound control and noise level rules, regulations and ordinances that apply to any work performed pursuant to the Contract. Each internal combustion engine used for any purpose on the job or related to the job shall be equipped with a muffler of a type recommended by the manufacturer of such equipment. No internal combustion engine shall be operated on the project without said muffler. Full compensation for conforming to the requirements of this section shall be considered as included in the prices paid for the various contract items of work involved and no additional compensation will be allowed therefore. Sounds, such as loud music, that are not related to the project, shall be kept at levels so as to not disturb the general public. 2.13 TRAFFIC CONTROL_ The Contractor shall acquire a City permit for all street closures. The Contractor shall abide by the Manual on ITnifonn Traffic Control Devices (MUTCD) approved by the Federal Highway Administrator as the National Standard in accordance with Title 23 U.S. Code, Sections 109(d), I t4(a), 217, 315, and 402(x), 23 CFR 655, and 49 CFR 1,48(b)(8), 1.49(b)(33), and 1.48(e)(2). The California Manual on Uniform Traffic Control Devices (California MUTCD) is published by the State of California, Department of Transportation and is issued to adopt uniform standards and specifications for all official traffic control devices, in accordance with Section 21400 of the California Vehicle Code. This manual is current as of the date of publication on the footer page. However, it may be necessary from time to time to modify, change or adopt new standards and specifications for traffic control devices and /or issue errata or editorial changes to the manual. To ensure that the traffic control device practitioner is accessing the most current information regarding traffic control device topics for California, the practitioner is advised to always reference the California MUTCD web site, The California MUTCD, California Sign Specifications and other publications and related current information is available on the 1ntCrnet at the following web link: http:/,Iwww.dot.ca.gov/hqi'traffops/sifmtech/nlutedsupp/ Addresses for Publications Referenced in the California MUTCD The Contractor shall notify the SAPRF representative of intent to begin the contract work at least five (5) days before work is begun, The Contractor shall cooperate with local authorities relative to handling Districts 1, 4 and 5 Park Landscape RFP ff - 19 8ti