25D - AGMT - LED STREET LIGHTS - Laserfiche WebLink

Home Browse Search

be Included In the lump sum costs proposed. The Proposer may need to excavate to access and disconnect the existing conduit sweeps at the pole foundations to properly pull the new wire. All costs for excavation, including hardscape replacement and conduit disconnect/reconnect shall be included in the lump sum price. Scope of work includes the following: Install new service pedestals per specifications. Remove existing cable from conduit. Intercept existing conduit and install new conduit and pull boxes to connect to new service points, Re -wire system using existing conduit. Replace any deteriorated conduit only if it is impossible to pull the new wire through. Remove and salvage existing fixtures. Rewire poles and install new fuses and fixtures, etc. per City Standard #1126 -F. Material List: Fixtures: Powerlux PLEDMR /DV/B/9/4000/7401120- 277/SA Wire; THW red, black, green Conduit: 2" Schedule 80 PVC Fuses: 240V 10A with holder per City Standard #1126 -F two (2) per pole Service Pedestals: Milbank MILCP3B1 11 15A22SP33 120/240V w/ GFI duplex receptacles; base MILCP16PDMNTCALT PART II SPECIAL PROVISIONS I. EXCAVATING AND BACKFILLING Excavating and backfilling shall conform to Section 86.2.01, "Excavating and Backfilling" of the California State Specifications (CSS) and these Special Provisions. The following paragraph shall be added to Section 86 -2,01: All excavated material in roadway shall be removed from the site and backfilled with compacted crushed aggregate base material topped with temporary asphalt concrete on the same working day as removed. A temporary alternative to backfllling; with permission of the Agency, shall be the placement of steel plates with temporary asphalt concrete ramping at edges of the steel plates. Such plating shall not be allowed for more than five (5) working days, after which backfill shall be required. 25D -14