Laserfiche WebLink
complete and in place for the project as shown on the drawings and specified herein <br />2.05 ORNAMENTAL STEEL FEfVCING <br />Part 1 - General <br />Work Included: The contractor shall provide all labor; materials, and appurtenances necessary <br />for installation of the industrial ornamental steel fence system defined herein and indicated on <br />the drawings. Provide and install, "AEGIS II — MAGESTIC STYLE" ornamental steel fence <br />system or approved equal, as described below. <br />System Descrlption: The manufacturer shall supply a total industrial ornamental steel fence <br />system of the Ameristar0 Aegis IIT"' MagesticT"°' design. The system shall include all <br />components (i.e., pickets, rails; posts, gates and hardware) required. <br />Quality Assurance: The contractor shall provide laborers and supervisors who are thoroughly <br />familiar with the type of construction involved and materials and techniques specified. <br />References <br />ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc -Coated (Galvanized) or Zinc - <br />Iron Alloy Coated (Galvannealed) by the, Hot Dip Process <br />ASTM A924/A924M - Standard Specification for GeneralRequirements for Steel Sheet, <br />Metallic -Coated by the Hot Dip Process <br />ASTM A1011/A1011M - Standard Specification for Steel, Sheet and Strip, Hot -Rolled, Carbon, <br />Structural, High -Strength and High -Strength Low -Alloy with Improved Formability' <br />ASTM 13117 - Practice for Operating Salt Spray (Fog); Apparatus <br />ASTM D523 - Test Method for Specular Gloss <br />ASTM 0822 - Practice For Conducting Tests On Paint and Related Coatings and Materials <br />Using Filtered Open -Flame Carbon -Arc Light and Water Exposure Apparatus <br />ASTM D1654 - Test Method for Evaluation of Painted or Coated Specimens Subjected to <br />Corrosive Environments <br />ASTM D2244 - Test Method for Calculation of Calor Differences From Instrumentally Measured <br />Color Coordinates <br />ASTM D2794 - Test Method for Resistance of Organic Coatings to The Effects of Rapid <br />Deformation (Impact) <br />ASTM D3359 -Test Method for Measuring Adhesion by Tape Test <br />Submittal: The manufacturers literature shall be submitted prior to installation. <br />Product Handling And Storage; Upon receipt at the job site, all materials shall be checked to <br />ensure that no damage occurred during shipping or handling. Materials shall be stored in such a <br />manner to ensure proper ventilation and drainage, and to protect against damage, weather, <br />vandalism, and theft. <br />Part 2 - Materials <br />Manufacturer: The industrial ornamental steel fence system shall conform to Ameristar® Aegis IIT"", <br />MagesticTm 3 -Rail style manufactured by Ameristar Fence Products, Inc., in Tulsa, Oklahoma. Or <br />approved equal. <br />Aegis 11 T11 - Invincible Style <br />Construction Specification <br />13-064 <br />Page 19 <br />