Laserfiche WebLink
e. Run <br />i'. Motor High Temperature <br />VI'D/S91 Fail <br />IL Booster Fun,rp Speed (VFD ptu:rG,ps only) <br />2. For each pump mortitor the rot towing signals via Ethernet or Modhus <br />a. Booster Pump Status - READY <br />h. Booster Purnp Trip Alum , Rrerth Fatilt <br />c. Booster Pump Trip alarm. `vlotor Overload <br />d. Boaster pump Trip Alarm. Phase Ions <br />e, Booster Puntp Warning, Drive, Over Temp <br />f. Boaster Ptathp Motor Vol[.,,' <br />g. Booster Pump Motor Power (KW) <br />h. Booster pump ALARM RF:SR f <br />3, Purnp PLC" Control Modes: <br />a. Computer Iklanual Modc: <br />I . Output to CALL signal to the pump starter when all the following conditions are <br />islet: <br />a, Pump 1IOA switch is in (lie AUTO position <br />b, COMPUI'Eki NIAIw UAL Putup mode is selected on the I1;N91 <br />c:. The drive RF..Ai7Y signal is present <br />d. The Operator selects RUN on the IiMI pop -hip "tIndow, far tninual putatp <br />control, <br />In Mciti€xn, for a VIED motor Output a SPEED siEzial between 0% and 100% <br />corresponding to the speed setpoint entered by the Operator on the Computer <br />Manual pap -up window. <br />3. Remove the CALL si,gyaal to the drive when the drive is rurnhing, and any of the <br />following coriditious are detected: <br />