75A - PH - BUILDING FIRE CODES - Laserfiche WebLink

Home Browse Search

4. All system components must be 100 percent compatible with analog and digital modulations after installation without adjustments or modifications. The systems must be capable of encompassing the frequencies stated herein and capable of future modifications to ._..a frequency range subsequently established by the jurisdiction. 5. Active devices shall have a minimum of -50 dB 3rd order intermodulation protection. 6. All active in- building coverage devices shall be FCC Fart 90 Type Certified. (f) Section 510.5.1 Approval prior to installation is revised to read as follows: (a) Section 510.52 Minimum qualification of personnel is revised to read as follows: A valid FCC - issued general radio operator's license. 2. Certification of in- building system training issued by a nationally recognized organization school or a certificate issued by the manufacturer of the equipment being installed. h) Section 510.5.3 Acceptance test procedure item 7 is revised to read as follows: 510.5.3 Acceptance test procedure When an emergency responder radio coverage system is required and upon completion of installation the building q wner shall have the radio system tested to ensure that two -way coverage on each floor of the building is not less than 90 percent. The test procedure shall be conducted as fo I lows: As part of the installation a spectrum analyzer or other suitable test equipment_ shall be utilized to ensure spurious oscillations are not being ,generated by the subject signal booster. This test shall be conducted at the time of installation and subsequent annual inspections by the FCC licensed technician hired by the property owner and an OCSD /Commun!cations Division FCC - certified technician. (c) Section 510.6.1 Testing and proof of compliance is revised to read as follows: Ordinance No NS -XXXX Page 28 of 51 75A -52