Laserfiche WebLink
510.6.1 Testing and proof of compliance. <br />1. In- building system components shall be tested to determine general functional <br />operability. <br />2. Signal boosters shall be tested to ensure that the gain is the same as it was <br />upon initial installation and acceptance. <br />can be determined. <br />4. Other active components shall be checked to verify operation within the <br />manufacturer's specifications. <br />5. If noncompliance is found, the FCC licensed technician will assess <br />improvements necessary and provide such information to OCSD <br />Communications and the fire and building code officials. <br />6. At the conclusion of the testing a certification report which shall verify <br />compliance with Section 510.5.3, shall be submitted to OCSD Communications <br />and the fire and building code officials. <br />SECTION 23: Sections 14 -29 is hereby deleted in its entirely and Chapter 6 is <br />adopted in its entirety without amendments. <br />Sao. -4 -2-g. •.- Building- seFVisesai <br />(a)— Sestioa� 60. cs e is hereby an}erded- as4oNows: <br />KNIVOWN&A WIMIM !e <br />�iw- 5933 Will <br />eee ee <br />00 e0 •- <br />e a- e <br />.ee - -e' e <br />M <br />e e <br />Ordinance No. NS -XXXX <br />Page 29 of 51 <br />75A -53 <br />