BAKERSFIELD WELL & PUMP CO.-2016

Home Browse Search

EXHIBIT A CTT* OF SANTA A:NFA, RFP NO.:,16i 090 WATER WELL, PUlvl? AND NFO'T'OR REPAIR SERVICES Appendix ATTACHMENT 1, SCOPE OF WORK A. General (description The Contractor shall provide water well casing, pump and motor rehabilitation, repair, replacement and related services for the City of Santa Ana at various locations within the City. The general scope of services is described below, B. Work Description The Contractor shall provide all necessary supervision,, labor, materials, tools, and equipment to perform pump pulling and installations, water well rehabilitations,, well casing repairs and installations, water well video inspections, electric motor repairs, electric ,motor rewindln,g.s, and repair services on various types of pumps and. motors, on an as assigned basis, at various locations throughout the City. The Contractor shall meet with the Water Production project, manager prior to starting any work at the worksite, Access to the worksite shall be controlled by the Public Works Agency according to the security standards in place at that time. The Contractor's services shall Include, but are not necessarily limited to, the following'. The Contractor shall provide transportation for its heavy duty equipment, such as, but not limited to, drilling rigs, pump rig, flatbed truck, boom truck, tractor trailer, as requested by the City to and from Contractor's facility to each Water Production worksite. All electric motor repair work shall be transported by the Contractor to an EASA Accredited M.em.ber facility far repair and returned to the City when repairs are complete, All water discharged shall be through an NPDES facility approved by the Project Manager, It shall be the Contractgr's responsjblllty'to propose a method to discharge water that is NPDES cgMpilant and .may include meth,00s .ouch as water detention, through storage tanks or o#tier conforming strategies.. 1. PUMP REMOVALIINSTALLATION, SERVICE The Contractor shall be qualified to perform water well pumps removal and instalEatan. At the lnitlal. setup for pulling a well pump, the Contractor shall perform Iockoutltagout of the electrical and hydraulic systems. 2. WELL PERFORMANCE TESTING SERVICE. The Contractor shall be qualified to perform. well performance testing, After initial well performance testing setup, all testing data shall be given to the City representative upon completion of testing.. The Contractor shall furnish and install t h e development engine temporarily used to power the test pump process to flush out all sand and small grit out of the area around the well to prevent clogging of the distribution system. All water discharged shall be through an approved facility approved by the Project Manager, The Contractor shall provide the Project. Manager with its evaluation and recommendation, including cost estimates per project. All testing work shall be subject to the Project Manager's written approval prior to commencing any work by the Contractor; Well performance testing shall be done in accordance with AWWA Al00-g7 standards. 3. WATERWORKS PUMP REPAIR SERVICE The Contractor shall be qualified to repair of one or more of the following pump units: