Laserfiche WebLink
JdA USSSTANDARU <br />FIAT WASHER <br />GRADE NUT <br />COURSE THREAD <br />m <br />NOTES: <br />BRACE AND CARRIAGE BOLT SPECIFICATION <br />112' CIA I'l YWOOD <br />kOUNDEU HCVD <br />112' I*5 STANDARD <br />FtAT VIA311CR <br />CARRbIGE 300 <br />ON VICATHERSIDL OF <br />OULNIN, <br />§,W MILE IN GRACE AND <br />4VWOOD PRF DRILLED <br />DURING I',UIRICAI ION <br />I. USE 2" BY 4" BY 81 (OR LONGER) CONSTRUCTION GRADE LUMBER FOR BRACES. <br />2, USE 3/8" X 12" CARRIAGE BOLTS -ROUNDED I -MAD ON OUTSIDE OF BUILDING <br />3. TIGHTEN NUTS FROM INSIDE ENOUGH TO SLIGHTLY COMPRESS WASHER INTO <br />2X4 BRACE, <br />4. USE 1/2" WASHER ON WEATHER SIDE TO ACCOMMODATE THE WRENCH NECK OF <br />BOLT AND ELIMINATE PRY POINTS. <br />City of Santa Ana RFP 17-066 <br />Page Al -6 <br />25G-41 <br />