PSOMAS INC - 2017 - Laserfiche WebLink

Home Browse Search

specifications with some detail included and an engineer's estimate of probable costs with preliminary quantities and unit costs. The 60% PS&E submittal shall also include 60% drawings and specifications related to system integration and controls as described in Task 8 below, Task 8. PLC Panel Design and Control Strategies The City will provide to the Consultant with Functional Specification document which outlines the physical components, instrumentation, operating parameters, alarm logic, Human Machine Interface (HMT) capabilities, remote and local control strategies, communication logic and fall capabilities of the well site. The Consultant shall review the existing Functional Specification and update/revise as necessary to incorporate any site and well improvements identified and incorporated into the plans. The Consultant shall enhance existing operational practices by exploiting new capabilities or functionality of technology, recommend corrections to current deficiencies, recommend improvements, as well as enhance reporting, monitoring and system controls capabilities. The Consultant shall plan for a minimum of two (2) work sessions (3 hours each) with City Staff to develop and update the Functional Specification documents. The City will provide to the Consultant a copy of the City's standard control panel drawings and specifications. The Consultant shall develop control panel drawings for Well 29 in compliance with the standards. Each panel drawing shall fully specify all system equipment in the panel, including but not limited to, PLCs, HMI's, Radios, input/output cards, timers, fuses, switches, panel dimensions, backup power supplies and relays. Panel drawings shall be detailed and precise for construction and fabrication purposes. a. Drawings shall include, but not be limited to, all wiring diagrams for each panel including analog inputs, analog outputs, discrete inputs, discrete outputs, terminal blocks, etc. This design shall be provided to the Contractor for fabrication. b. The loop diagrams shall include content required by ANSPISA 55.4 - Instrument Loop Diagrams, c. Control panel drawings shall also have Factory Acceptance Test (FAT) requirements and Site Acceptance Test (SAT) requirements, Acceptance testing requirements will be developed based on all operational and audit workshops conducted and be individually created based on the applied site. Clear definitions of acceptance criteria will be required. City will provide example FAT and SAT criteria from previous projects for use in development of Well 29 testing criteria. d. In the event of a failed FAT or SAT, procedures for correction and retesting shall be defined. e. The Consultant shall witness and act, as the City's agent, for all factory and on-site functional and performance acceptance testing. Docrunentation and coordination of resolution for all discrepancies will be required. This requirement shall apply to any site undergoing maintenance improvements. The Consultant shall assume a maximum of 40 hours to ensure FAT and SAT compliance, f Drawings shall include all standard field wire labeling requirements, wire termination, color coding of wiring and devices as well as nameplates. Task 9.100% Construction Document (PS&E) Submittal Utilizing comments received from the various reviewers, the Consultant shall prepare the 100% PS&E's in accordance with the approved Basis of Design Report as prepared in Task 6. The Consultant shall be required to compile in a matrix format all 60% comments received and responses made by the Consultant for review by the Project Manager. A column. in the matrix will City of Santa Ana RFP 16-110 Page Al -5