KIMLEY-HORN AND ASSOCIATES - 2018

Home Browse Search

KidepMorn Warner Avenue Street Improvements 1/10/2018 determined as part of Task 4. Potential conflicts with existing utilities will be shown on profiles with approximate location of utilities, per the utility agencies readily available record drawings. Storm drain plans will be prepared at a scale of 1" = 20' horizontal and 1" = 2' vertical for profiles. Deliverables: 60%, 95%, and 100% Plans, electronic files in Microstation V81 and PDF, and responses to previous review comments from the City Task 14: Street Light and Electrical Plans Kimley-Horn will prepare street light plans for Warner Avenue from Wright Street to Oak Street. Plans will incorporate street lighting along both sides of the street. We will conduct voltage drop calculations to determine the wiring sizes. We anticipate we will need to connect to existing service locations along the corridor. New service point locations may be necessary. Coordination with Southern California Edison to determine new and existing service points to be used will be a part of this task. We will provide a photometric analysis to determine required illumination for the corridor. The street light plans will be prepared on 24" x 36" full-size sheets. Decorative street lighting fixtures are excluded from this scope of services. Deliverables: 60%, 95%, and 100% Plans, electronic files in Microstation Val and PDF (final Plans will be sealed and signed), responses to previous review comments from the City Task 16: Traffic Signal and Signal Interconnect Plans We will prepare traffic signal and signal interconnect plans to incorporate the improvements and street widening along Warner Avenue. Traffic signal plans will include intersections of: Wright Street, Grand Avenue, Standard Avenue, Halladay Street and at the Orange County Fire Station. Installation closed-circuit television (CCTV), video detection, conduits, and cables or modification of existing communication systems is anticipated within the project limits and will be shown on the traffic signal plans. The traffic signal interconnect plans will modify/install signal interconnect, single -mode fiber optics (SMFO), conduits, and cables for the existing communication system within the project limits. Plans will show the connection to each signalized intersection within the project limits. Pull box details and modification of conduit sweeps for the signal interconnect are included as part of this task. The traffic signal modification plan will be prepared in accordance with current City and Caltrans standards and will be prepared at a scale of 1" = 20' on a 24" x 36", full-size sheet. The traffic signal interconnect plan will be at a scale of 1" = 40' on a 24" x 36", full-size sheets. Fiber assignment diagrams are not in this scope of work. Deliverables: 60%, 95%, and 100% Plans, electronic files in Microstation V81 and PDF (final plans will be sealed and signed), and responses to previous review comments from the City Task 16: Specifications Kimley-Horn will prepare technical specifications based upon the boiler plate supplied by the City. Bid items will be described as reasonably required in the General Provisions and will be included in the Contractor's bid list. References for the technical provisions to the City's Standards and Standard Specifications for Public Works Construction (Greenbook), Caltrans, or other appropriate specifications will be shown. 6 1 P a g e