US NATIONAL CORPORATION - Laserfiche WebLink

Home Browse Search

deployed and Is provided for proposal evaluation purposes only The successful contractor shall perform the following scope of work for the preparation, painting and coating of the East Pump Station and Well 26 discharge piping. The exterior of the East Pump Station and Well 26 discharge piping will be prepared for painting in accordance with AWWA Standard C210. All loose and flaking material that is removed shall be captured and disposed of properly and not allowed to spread or fall onsite. Prior to application of coating, the Contractor shall notify the City for inspection and approval. Upon approval, the Contractor will apply a base coat and one finish of coat of epoxy coating. Final color shall be approved by the City, The final dry thickness of the epoxy coating shall be a minimum of 16 pm or the manufacturer's recommendations, whichever is thicker. Prior to acceptance of the coating and painting, the piping shall be visually field 'inspected per AWWA C210 as well as pass an electrical inspection for continuity. QUALIFICATION The bidder, at time of bid submittal and through the term of the contract, shall possess the correct occupational and/or professional license necessary to carry out and perform the work required pursuant to all applicable federal, State, and Local laws, statues, ordinances, rules, and regulations. A list of minimum of three (3) references, including municipality name and address, contact name, and phone number, for municipal customers receiving similar services are required in this Invitation for Bid must be submitted with each bid. References must be located in Los Angeles County, Orange County, or Inland Empire. These references shall be used in the evaluation of this bid to determine award. DISTRIBUTION OF WORK The Contractor(s) selected for this work or other future work to be determined shall provide written estimates for any work requested. If multiple Contractors have been awarded a contract, the lowest responsive bid amongst the selected Contractors shall be awarded the corresponding job order. No work shall be allowed to proceed until authorized by the Water Production Principal Civil Engineer or his designee. Any material proposals for the painting and piping shall be identified in the requested estimate. Upon approval, full material submittals shall be provided for review and approval from the Water Production Division. Submittals shall include Safety and Data Sheets, manufacturer's application instructions and manufacturer's product specifications. The manufacturer's product specifications shall clearly identify conformance with AWWA standards. PREVAILING WAGE The Director of the Department of Industrial Relations of the State of California has ascertained the prevailing rate of per diem wages in dollars, based on a working day of eight hours, for each craft or type of worker or mechanic needed to execute any construction or maintenance contract, which may be awarded by Public Works. The current prevailing wage rates as adopted by the Director of the Department of Industrial Relations are Incorporated herein by reference and may be accessed at http://www.dir.ca.gov/.