Laserfiche WebLink
5 Mounting SMA Solar Technology AG <br />Installation ManualSBxx-1SP-US-41-IA-xx-12 26 <br />Prescribed clearances in accordance with the National Electrical Code ® or <br />Canadian Electrical Code ® CSA C22.1 <br />Under certain conditions, the National Electrical Code ® or the Canadian Electrical Code® <br />CSA C22.1 specify greater clearances. <br />• Ensure that the prescribed clearances in accordance with the National Electrical Code® <br />or Canadian Electrical Code® CSA C22.1 are adhered to. <br />☐ Maintain the recommended clearances to walls as well as to other inverters or objects. <br />☐ If multiple products are mounted in areas with high ambient temperatures, increase the <br />clearances between the products and ensure sufficient fresh-air supply. <br />70 <br />0 <br />(2 <br />8 <br />) <br />60 <br />0 <br />(2 <br />4 <br />) <br />200 <br />(8) <br />200 <br />(8) <br />200 <br />(8) <br />500 <br />(20) <br />Figure 6 : Recommended clearances(Dimensions in mm (in)) <br />5.2 Mounting the Inverter <br />Additionally required mounting material (not included in the scope of delivery): <br />☐ 2 screws suitable for the support surface (diameter: 8 mm (5/16 in)) <br />☐ 2 washers suitable for the screws <br />☐ Where necessary, 2 screw anchors suitable for the support surface and the screws <br />CAUTION <br />Risk of injury due to weight of product <br />Injuries may result if the product is lifted incorrectly or dropped while being transported or <br />mounted. <br />• Transport and lift the product carefully. Take the weight of the product into account. <br />• Wear suitable personal protective equipment for all work on the product. <br />EN <br />G <br />L <br />I <br />S <br />H <br />534 S Sycamore St <br />- 10110979707/01/22