My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
723 S Orange Ave - Plan
PBA
>
Building
>
ProjectDox
>
O
>
Orange Ave
>
723 S Orange Ave
>
723 S Orange Ave - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
5/30/2025 5:01:06 PM
Creation date
5/30/2025 8:01:05 AM
Metadata
Fields
Template:
Plan
Permit Number
20175614
101109708
Full Address
723 S Orange Ave
Document Relationships
101109708 - Permit
(Permit - Plan)
Path:
\Building\Permits\O\Orange Ave\723 S Orange Ave
20175614 - Permit
(Permit - Plan)
Path:
\Building\Permits\O\Orange Ave\723 S Orange Ave
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
47
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
Rapid Shutdown Kit Installation - MAN-01-00186-1.6 1 <br />Rapid Shutdown Kit - Installation and Configuration <br />(Single Phase Inverters) <br />This document describes how to install the rapid shutdown kit in the SolarEdge Safety Switch, and how to enable the rapid <br />shutdown feature in the inverter in order to provide the functionality described in the Rapid Shutdown clause of NEC2014 <br />690.12 (1) through (4). <br />Kit Contents <br />Rapid shutdown cables <br />Micro-SD card and SD card adapter with firmware files (Note: DO NOT THROW AWAY THE CARD AND THE ADAPTER; keep <br />them for installation of other rapid shutdown kits) <br />Cable Installation <br />Perform this procedure before connecting the strings to the Safety Switch [Chapter 4: Connecting the AC and the Strings to the <br />Safety Switch in the SolarEdge Installation Guide]. <br />1 Turn the inverter ON/OFF switch to OFF. If installing the kit in an inverter that is already operating, wait until the LCD <br />indicates that the DC voltage is safe (<50V), or wait five minutes before continuing to the next step. <br />2 Turn the Safety Switch and the AC switch on the main circuit board to OFF. <br /> <br />WARNING! <br />If you cannot see the inverter panel, or if a malfunction is indicated on the LCD panel, wait five minutes for the input <br />capacitors of the inverter to discharge. <br />3 Loosen the four Allen screws on the front cover of the Safety Switch, and open the cover. <br />4 Carefully disconnect the two DC cables from the left side of the switch and from the DC connection spring clamp terminals, <br />as illustrated below1. Use a standard straight-bladed screwdriver to disconnect the cables from the terminals. <br />Figure 1: Inside the AC/DC Safety Switch <br /> <br /> <br />1 The internal components may vary depending on the Safety Switch model; the figures in this documents show the AC/DC Safety Switch for single phase <br />7.6-11.4 kW inverters. <br />DC connection terminals <br />Disconnect here <br />Disconnect here <br />Switch terminal block <br />723 S Orange Ave <br />03/14/22
The URL can be used to link to this page
Your browser does not support the video tag.