10180319_3831 S. BRISTOL - Plan - Laserfiche WebLink

Home Browse Search

October 1,2013 SIGN COMPONENTS MIANUAL (SAM) 16 6: When not marked for indoor use only, all models shall have liquid tight fittings on both primary and secondar'y circuits, Class 2 LEDs, designated as "SIGNRAYZ" LS-A-YY-GZ Series, where A and YY may be·replaced alphanumeric characters; and Z may be replaced with alpha characters. 1. T.hese products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less. 2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy limited circuit. 3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary 0r output rating of the Class 2 supply. 4. These products are suitable for use in dr·y. damp and wet locations. 5. These products are not required to be enclosed or protected from the weather in the end product. 6. These products may be secured in place in the end product by any means available. 7. Models with designation of Z=2 are suitable for IP 68. Any other number aside from 2 is only suitable for IP 66. Class 2 LEDs, designated as "SIGNRAYZ MINI", "BOXRAYS BOLD" or "BOXRAYZ LITE"PCA-XXXXY-ZZT Series, where XXXX and ZZ may be any alphanumeric characters: and YY and Z may be any alpha characters. 1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less. 2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and'energy limited circuit. 3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class i2 supply. 4. These products are suitable for use in dry, damp and wet locations. 5. These products are not required to be enclosed or protected from the weather in the end product. 6 These products may be secured in place in the end product by any means available. 7. These products are suitable for IP 68 designation Class 2 LEDs, designated as "SignRayz® PRC)160", 'SignRayz® PRO215'", "SignRayz® PROCLR", "SignRayz® PROMIN", "SignRayz® PRO 1 15" or ' SignRayz® PROCLR" LS-PROXXX-¥YY-#ZZ; where XXX, YTY, # and ZZ may be combinations of any alphanumeric characters. 1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less. 2. These products are intended for use only when Lconnected'to a power source that complies with Class 2 voltage and energy limited circuits. 3. When these units are connected to a Class 2 supply circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 4. These products are suitable for use in dry, damp and wet locations. 5. These products are not required to be enclosed or protected from the weather in the end product. 6. These products may be secured in place in the end product by any means available. 7. These pcoducts are suitable for IP 68 designation. Class 2 LED modules, designated as "BoxRayz™ 400", LS-BOXXXX-YYY-#ZZ Series, where XXXX, YYY, # and ZZ may be combinations of any alphanumeric characters. 1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less. 2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy limited circuits 3. When these units are connected to a Class 2 supply circuit, they are hotto draw a total wattage of greater than the secondary oc output rating of the Class 2 supply. 4. These products are suitable for use in dry, damp and wet Jocations. 5. These products are not required to be enclosed or protected from the weather in the end product. 6. These products may be secured in place in the end product by any means available. 7. These products are suitable for IP 68 designation. ALIGHT DISTRIBUTION, DBA AION LED SUITE 330 2325 3RD ST SAN FRANCISCO, CA 94107 E348513 LED Lighting Modules, Cat. No. AION LED MODULE 200 SERIES. 1. These products are only suitable for connection to the output of a UL Listed or R/C (UYMR2), Component - Sign Accessory Class 2 LED power supply or UL Listed 0, R/C Class 2 Power Supply rated 12VDC. 2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 requirements. 3. When units are connected to a Cla#2 circuit, their number is to be limited to draw a total wattage of no greater than the secondary current rating of each Class 2 power supply. 4. These products are suitable for use in dry, damp and wet locations without additional enclosures. LED Lighting Modules, Model AION LED MODULE 100 SERIES. 1. These products are only suitable for connection to the output of a UL Listed or R/C (UYMR2), Component - Sign Accessory Class 2 LED power supply or UL Listed or R/C Class 2 Power Supply rated 12VDC. 2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 requirements. 3. When units are connected to a Class 2 circuit, their number is to be limited to draw a'total wattage of no greater than the secondary current rating of each Class 2 power supply. 4. These products are suitable for use in dry, damp and wet locations without additional enclosures. LED Lighting Modules, AION' LED STRIP LIGHT X-X SERIES, where X-X can be any alpha-numeric combination denoting LED color. 1. These products are only suitable for connection to the output of a UL Listed or R/C Class 2 Power Supply rated 12VOC. 2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 requirements.