Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />3.Project name. <br />4.Project location. <br />5.Architect's name and address. <br />6.Engineer's name and address. <br />7.Contractor's name and address. <br />8.Report date. <br />9.Signature of TAB supervisor who certifies the report. <br />10.Table of Contents with the total number of pages defined for each section of the report. <br />Number each page in the report. <br />11.Summary of contents including the following: <br />a.Indicated versus final performance. <br />b.Notable characteristics of systems. <br />c.Description of system operation sequence if it varies from the Contract <br />Documents. <br />12.Nomenclature sheets for each item of equipment. <br />13.Data for terminal units, including manufacturer's name, type, size, and fittings. <br />14.Notes to explain why certain final data in the body of reports vary from indicated values. <br />15.Test conditions for fans and pump performance forms including the following: <br />a.Settings for outdoor-, return-, and exhaust-air dampers. <br />b.Conditions of filters. <br />c.Cooling coil, wet- and dry-bulb conditions. <br />d.Face and bypass damper settings at coils. <br />e.Fan drive settings including settings and percentage of maximum pitch diameter. <br />f.Inlet vane settings for variable-air-volume systems. <br />g.Settings for supply-air, static-pressure controller. <br />h.Other system operating conditions that affect performance. <br />D.System Diagrams: Include schematic layouts of air and hydronic distribution systems. Present <br />each system with single-line diagram and include the following: <br />1.Quantities of outdoor, supply, return, and exhaust airflows. <br />2.Water and steam flow rates. <br />3.Duct, outlet, and inlet sizes. <br />4.Pipe and valve sizes and locations. <br />5.Terminal units. <br />6.Balancing stations. <br />7.Position of balancing devices. <br />E.Air-Handling-Unit Test Reports: For air-handling units with coils, include the following: <br />1.Unit Data: <br />a.Unit identification. <br />b.Location. <br />c.Make and type. <br />d.Model number and unit size.