Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />HVAC INSULATION 23 0700 - 7 <br />a.Dow Chemical Company (The); Styrofoam. <br />b.Knauf Insulation; Knauf Polystyrene. <br />c.Other manufacturers by voluntary alternates. <br />2.2 INSULATING CEMENTS <br />A.Mineral-Fiber Insulating Cement: Comply with ASTM C 195. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Insulco, Division of MFS, Inc.; Triple I. <br />b.P. K. Insulation Mfg. Co., Inc.; Super-Stik. <br />c.Others manufacturers by voluntary alternates. <br />B.Expanded or Exfoliated Vermiculite Insulating Cement: Comply with ASTM C 196. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.P. K. Insulation Mfg. Co., Inc.; Thermal-V-Kote. <br />b.Other manufacturers by voluntary alternates. <br />C.Mineral-Fiber, Hydraulic-Setting Insulating and Finishing Cement: Comply with <br />ASTM C 449/C 449M. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Insulco, Division of MFS, Inc.; SmoothKote. <br />b.P. K. Insulation Mfg. Co., Inc.; PK No. 127, and Quik-Cote. <br />c.Rock Wool Manufacturing Company; Delta One Shot. <br />d.Other manufacturers by voluntary alternates. <br />2.3 ADHESIVES <br />A.Materials shall be compatible with insulation materials, jackets, and substrates and for bonding <br />insulation to itself and to surfaces to be insulated, unless otherwise indicated. <br />B.Calcium Silicate Adhesive: Fibrous, sodium-silicate-based adhesive with a service temperature <br />range of 50 to 800 deg F. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Foster Products Corporation, H. B. Fuller Company; 81-27/81-93. <br />b.Vimasco Corporation; 760. <br />c.Other manufacturers by voluntary alternates. <br />2.For indoor applications, use adhesive that has a VOC content of 80 g/L or less when <br />calculated according to 40 CFR 59, Subpart D (EPA Method 24).