Laserfiche WebLink
CITY OF SANTA ANA <br />SPECIFICATIONS <br />PROJECT NO.: XX-XXXX <br />PROJECT TITLE <br /> <br />81 <br />2. Fully loaded cabinet shall be tested for functionality by an independent party and <br />certificate of completion shall be provided to the City prior to field installation. <br />Cabinet can be tested at: <br /> <br />Econolite Systems <br />1250 N. Tustin Ave <br />Anaheim, CA 92807 <br /> <br />3. The Cabinet Assembly shall consist of but not limited to the following: <br /> <br />a. Housing #1 – Clear Anodized <br />b. Mounting Cage #1 <br />c. Fan and thermostat assembly <br />d. Power Distribution Assembly #2L <br />e. Input Files I & J <br />f. Input Panel #1 <br />g. Service Panel #1 <br />h. Service Panel Assembly <br />i. Output File #1 <br />j. C1 Harness #1 <br />k. All other associated wiring, hardware and foundation bolts. <br /> <br />4. In addition to the Caltrans Standard TEES requirements, the following shall be <br />provided: <br /> <br />a. Red Monitoring Interface <br />All cabinets shall be equipped with a Red Monitoring Interface, mounted <br />integrally with the Output File #1. The Switchpacks to Conflict Monitor Unit <br />channel assignments are as follows: <br /> <br />Switchpacks CMU Channel <br /> <br />Swpk Ø1- Swpk Ø8 Ch. 1 – Ch. 8 <br />Swpk OLA, OLB, OLC, OLD Ch. 9 – Ch. 12 <br />Swpk 2P,4P,6P,8P Ch. 13, 14, 15, 16 <br /> <br /> <br />b. Cabinet Lights <br />Each cabinet shall be equipped with two (2) fluorescent lighting mounted <br />inside the top front and rear portion of the cabinet. A door actuated switch <br />shall be installed to turn the cabinet lights on when either the front or rear <br />door is opened. The door switches shall be on a separate circuit by itself; and <br />used only to turn on the cabinet light. <br />c. Pullout Drawer/Cabinet Print Holder Assembly <br />505 E Central Ave <br />#B11/6/2024