Laserfiche WebLink
CITY OF SANTA ANA <br />SPECIFICATIONS <br />PROJECT NO.: XX-XXXX <br />PROJECT TITLE <br /> <br />196 <br />7.24 SUBMITTALS <br />Water main pipe and appurtenance submittals shall include, but not be limited to the <br />following manufacturer information: <br />1. C900 PVC pipe, Ductile Iron pipe and or other as approved by the Engineer <br />2. Gate Valves <br />3. Butterfly Valves <br />4. Fittings and Bends <br />5. Air Vacuum and Release Valves <br />6. Valve Box Frames and Covers <br />7. Polyethylene Sheeting <br />8. Trace Wire and Appurtenances <br />9. Ductile Iron Spools <br />10. Steel Casing, Casing Spacers and Casing End Seals <br />11. Polyethylene casing insulators <br />12. Blind Flanges <br />13. Mechanical Joint Caps <br />14. Disinfection and Flushing Plan <br />15. Sample of proposed sand bending material (approximate one gallon bag) <br />Fire Hydrant submittals shall be in conformance with City of Santa Ana Standard Plan <br />Nos. 1405, 1407, 1407A, and 1408 (if applicable), and shall include, but not be limited <br />to, manufacturer information from the following: <br />1. Fire Hydrant <br />2. Break off Spool, Check Valve, Extension and Bury <br />Water Service submittals shall be in conformance with all City of Santa Ana Standard <br />Plans for Water Services and shall include, but not be limited to, manufacturer <br />information from the following: <br />1. Service Saddles <br />2. Corporation stops <br />3. Copper tubing <br />4. Polymer meter box with lid <br />5. Meter coupling <br />6. Flanged coupling <br />7. Bronze elbows <br />8. Brass elbows <br />9. Brass nipples <br />10. Brass plugs <br />11. Curb stop <br />12. Compression bend <br />13. Jumpers (if planned for use) <br />14. Suction Strainer <br />15. Pre-cast Concrete Service Vault Box and cover <br />505 E Central Ave <br />#B11/6/2024