505 E Central Ave #B - DEF 1 - Plan

Home Browse Search

CITY OF SANTA ANA SPECIFICATIONS PROJECT NO.: XX-XXXX PROJECT TITLE 205 Upon completion of the work and final inspections, one mylar and two blueprints of the record (As-Built) information shall be delivered to the Engineer. The Engineer’s approval of record drawings is a condition of approval of final payment. 9.08 COVERING OF UNINSPECTED WORK-NOTIFICATIONS FOR INSPECTIONS The Contractor shall notify Engineer 48 hours (two working days) prior to required inspections. No work shall be covered prior to inspections. 9.09 CLEANING EQUIPMENT AND MATERIALS The Contractor shall thoroughly clean all fixtures, exposed piping, apparatus and equipment installed under its Contract. Parts which are to be painted shall be thoroughly cleaned of cement, plaster, etc., brushed with steel brush to remove rust, etc. cleaned and painted. All dirt, rubbish, paint spots, or grease on walls, walks, poles, equipment, or fixtures, for which the Contractor is responsible, shall be removed by the Contractor and the premises left in first-class condition. All rubbish resulting from work shall be cleaned up and removed daily from the site by the Contractor; also from time to time during construction, and when so directed by the Engineer. 9.10 TESTS This Contractor shall make all tests required by the Engineer, the Electrical Inspection Department of the Agency, or other authorities having jurisdiction. The cost of all tests, repairing of all damage resulting from these tests, replacement of equipment and materials including labor and other necessary work, due to nonconformance with the Electrical Ordinances, Safety Orders, these specifications and accompanying drawings, shall be borne by the Contractor. Should the Contractor refuse or neglect to make any tests necessary to satisfy the Engineer that the work has been performed in accordance with the true intent and meaning of the contract documents, the Agency may make such tests and charge the expense to the Contractor, and retain the cost of testing from the final payment to the Contractor. All wiring and connections shall be tested for continuity, grounds and short circuits before the devices and equipment are connected. Upon completion of the work, the Contractor shall demonstrate to the Engineer the satisfactory operation of the entire electrical systems(s). At the time of the final inspection, the Contractor shall have a qualified electrician at the job site to make all required tests or demonstrate operation of electrical equipment and lighting system(s). 505 E Central Ave #B11/6/2024