Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />QUALITY REQUIREMENTS 014000 - 6 <br />6. Statement whether conditions, products, and installation will affect warranty. <br />7. Other required items indicated in individual Specification Sections. <br />C. Factory-Authorized Service Representative's Reports: Prepare written information documenting <br />manufacturer's factory-authorized service representative's tests and inspections specified in <br />other Sections. Include the following: <br />1. Name, address, telephone number, and email address of factory-authorized service <br />representative making report. <br />2. Statement that equipment complies with requirements. <br />3. Results of operational and other tests and a statement of whether observed performance <br />complies with requirements. <br />4. Statement whether conditions, products, and installation will affect warranty. <br />5. Other required items indicated in individual Specification Sections. <br />1.10 QUALITY ASSURANCE <br />A. General: Qualifications paragraphs in this article establish the minimum qualification levels <br />required; individual Specification Sections specify additional requirements. <br />B. Manufacturer Qualifications: A firm experienced in manufacturing products or systems similar <br />to those indicated for this Project and with a record of successful in-service performance, as <br />well as sufficient production capacity to produce required units. As applicable, procure products <br />from manufacturers able to meet qualification requirements, warranty requirements, and <br />technical or factory-authorized service representative requirements. <br />C. Fabricator Qualifications: A firm experienced in producing products similar to those indicated <br />for this Project and with a record of successful in-service performance, as well as sufficient <br />production capacity to produce required units. <br />D. Installer Qualifications: A firm or individual experienced in installing, erecting, applying, or <br />assembling work similar in material, design, and extent to that indicated for this Project, whose <br />work has resulted in construction with a record of successful in-service performance. <br />E. Professional Engineer Qualifications: A professional engineer who is legally qualified to <br />practice in jurisdiction where Project is located and who is experienced in providing <br />engineering services of the kind indicated. Engineering services are defined as those performed <br />for installations of the system, assembly, or products which are similar in material, design, and <br />extent to those indicated for this Project. <br />F. Testing Agency Qualifications: An NRTL, an NVLAP, or an independent agency with the <br />experience and capability to conduct testing and inspection indicated, as documented according <br />to ASTM E 329; and with additional qualifications specified in individual Sections; and, where <br />required by authorities having jurisdiction, that is acceptable to authorities. <br />G. Manufacturer's Technical Representative Qualifications: An authorized representative of <br />manufacturer who is trained and approved by manufacturer to observe and inspect installation <br />of manufacturer's products that are similar in material, design, and extent to those indicated for <br />this Project.