Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />COMMON WORK RESULTS FOR ELECTRICAL 260500 - 2 <br />C. Coordinate location of access panels and doors for electrical items that are behind finished <br />surfaces or otherwise concealed. Access doors and panels are specified in Division 08 Section <br />"Access Doors and Frames." <br />D. Coordinate sleeve selection and application with selection and application of firestopping <br />specified in Division 07 Section "Penetration Firestopping." <br />PART 2 - PART 2 - PRODUCTS <br />2.1 SLEEVES FOR RACEWAYS AND CABLES <br />A. Steel Pipe Sleeves: ASTM A 53/A 53M, Type E, Grade B, Schedule 40, galvanized steel, plain <br />ends. <br />B. Cast-Iron Pipe Sleeves: Cast or fabricated "wall pipe," equivalent to ductile-iron pressure pipe, <br />with plain ends and integral waterstop, unless otherwise indicated. <br />C. Sleeves for Rectangular Openings: Galvanized sheet steel. <br />1. Minimum Metal Thickness: <br />a. For sleeve cross-section rectangle perimeter less than 50 inches and no side more <br />than 16 inches, thickness shall be 0.052 inch. <br />b. For sleeve cross-section rectangle perimeter equal to, or more than, 50 inches and <br />1 or more sides equal to, or more than, 16 inches, thickness shall be 0.138 inch. <br />2.2 SLEEVE SEALS <br />A. Description: Modular sealing device, designed for field assembly, to fill annular space between <br />sleeve and raceway or cable. <br />1. Manufacturers: Subject to compliance with requirements, available manufacturers <br />offering products that may be incorporated into the Work include, but are not limited to, <br />the following: <br />a. Advance Products & Systems, Inc. <br />b. Calpico, Inc. <br />c. Metraflex Co. <br />d. Pipeline Seal and Insulator, Inc. <br />2. Sealing Elements: EPDM interlocking links shaped to fit surface of cable or conduit. <br />Include type and number required for material and size of raceway or cable. <br />3. Pressure Plates: Carbon steel. Include two for each sealing element. <br />4. Connecting Bolts and Nuts: Carbon steel with corrosion-resistant coating of length <br />required to secure pressure plates to sealing elements. Include one for each sealing <br />element.