CARE AMBULANCE SERVICES, INC. (2)

Home Browse Search

0 City of Santa Ana 4.1.2 Vehicle Communications A. 800 MHz Mobile Radio Contractors must install and maintain at their sole cost and expense, an OCFA approved 800MHz mobile radio in the front passenger area (with a remote head in the rear patient area) of each ambulance that will be used for patient transport in the performance of the contract. The 800MHz mobile radios with a pre -identified radio identifier and at the discretion of the OCFA, configured to send status and message data, are to be used by Contractors' EMTs and ambulance personnel to communicate response status with OCFA dispatch and by OCFA paramedics to communicate with base and receiving hospitals during patient transport. Contractors must comply with the following 800 MHz mobile radio requirements: L Contractors must obtain all necessary licenses, permits, and/or approvals from OCC (and any other applicable licensing or permitting agency) to operate and maintain their 800 MHz mobile radios as required herein in conjunction with the 800 MHz C.C.C.S.; ii. Contractors must comply with all federal, state, and local laws, rules, statutes, and regulations governing the operation of 800 MHz mobile radios, including compliance with 800 MHz C.C.C.S. Standard Operating Procedures; iii. Contractors must ensure that their 800 MHz mobile radios are pre -assigned to a vehicle with a pre -identified radio identifier and are configured to send status and message data compatible with OCFA SmartNet Information Management System (SIMS), and must include an OCFA approved and issued Motorola DEKbox with 8 status/message keys to transmit unit status (e.g., en route, on scene, and available status functions); OCFA will City of Santa Ana Page 136 Fire/EMS Emergency Ambulance Transportation and Related Services Request for Proposals: # 18-059 August 28, 2018