MARKETING POWER, INC dba ENERGY RETROFIT, CO.

Home Browse Search

B, Lighting Design Our company offers lighting design services for every project. This step of the process is critical and features the following; Our design team will thoroughly review the information collected by our auditor so that we can better understand the existing lighting system, • Upon review, we will prepare a proposal to provide the client with a detalled financial analysis and our recommended LED lighting & controls to be installed. Our team will designtane or more options based on the following general guidelines and/or goals for each facility; o Match or improve current light quality and output o specify LED retraft kits where possible and new LED fixtures. when retrofit kits are not the desired option. a if operating hours are extremely low, or the fixture cannot economically be replaced with a new fixture or retrofit kit, we will typically specify "Type A" TLED lamps with new ballasts, Our process Includes design of the proper lighting controls technology, This step is frequentlyeveriooked by many competitors, but It has been shown that when properly designed and installed, lighting controls can reduce buildings' energy use by an additional 24.39%. Our process Includes the use of occupancy, dayllght, and dimming controls when appropriate. We have our own inhouse CALTCP certified Acceptance Technician to ensure that the system complies with state or local energy codes, If a customer has specific illumination standards that must be met, we have in-house ability to design a system based upon accurate photometric predictions for light levels. o ERC's certified lighting designer utilizes AG132 Ughting Software, the industry standard for accurately calculating both interior and exterior light levels, - o The customer's existing lighting fixture schedule along with CAD drawings are collected, and the information is then input into the AGI32 software, The software allows our designer to simulate the new illumination levels with the proposed LED fixture. o Our designer can then select the appropriate LED fixture that produces the Customer's required foot candle measurements, • Value Engineering is a key component of our process. We believe there is always great opportunity in the LED lighting to Identify materials and construction techniques to reduce project cost without compromising the quality, aesthetics, or reliability of the new LED system. Our design team works