CALIFORNIA, STATE OF EMPLOYMENT DEVELOPMENT DEPARTMENT (2)

Home Browse Search

EXHIBIT B - OUTLINE SPECIFICATIONS DIVISION 2 Demising walls separating State premises and other building tenants shall extend to the underside of structure above and shall be constructed to achieve an STC 50. B. Walls of equipment rooms, toilet rooms, conference rooms, hearing rooms, quiet rooms, training rooms, interview rooms, employee break rooms, and where otherwise indicated in Exhibit "A," shall be insulated to prevent transmission of sound or vibration. Wall construction shall achieve a minimum rating of STC 50 as set forth in ASTM E 90, C. Furnish and install insulation batts above the finished ceiling on each side of the wall for the entire length of the wall. D. Moisture -resistant wainscot of wall tile or other DGS-approved material shall be installed to all plumbing fixture walls and adjacent walls in the toilet rooms. Wall tile shall be a minimum of 4"x 4" glazed ceramic tile unless otherwise noted in Exhibit A. Wainscot shall extend a minimum of 4'-0" above finished floor, unless noted otherwise. E. Glazed openings in office partitions shall be set in metal frame assemblies and comply with Consumer Product Safety Commission impact -safety standards. 2.4 ROOF AND INSULATION A. Roof shall be weather tight and provided with a suitable drainage system that will effectively dispose of roof water without interfering with the use of premises. B. Roof shall be insulated such that the heat transfer values from roof to occupied areas comply with CCR Title 24. 2.5 CEILINGS A. Ceilings of office areas including reception, private offices, open office areas, corridors, and office storage areas shall have suspended "T" bar systems with acoustical lay -in tiles or other approved material with equivalent acoustical qualities. Ceiling heights shall be a minimum of 9'-0" and a maximum of 12'-0" unless otherwise approved by DGS. B. Where existing "T" bar system with acoustical lay -in tiles are reused, Lessor shall modify ceiling system as necessary to comply with all seismic safety regulations. "T" bar system and ceiling tiles shall be free of all dirt, dust, stains, and damage. Where replacement tiles are installed, all tiles shall be arranged as necessary to provide a uniform appearance in each enclosed space. C. Ceilings shall be a flat plane in each room and shall be suspended and finished as follows unless an alternate equivalent is preapproved by the State: 1. Restrooms and evidence board rooms: Plastered or spackled and taped gypsum board. 2. Offices, conference rooms and open office: Mineral and acoustical tile or lay -in panels with textured or patterned surface and regular edges or an equivalent preapproved by the State. Tiles or panels shall contain a minimum of 30 percent recycled content. 2.6 DOORS A. All interior doors shall be solid -core flush wood doors with wood veneer suitable for stain or paint finish. Doors shall be a minimum dimension of 3'-0" x 6'-8" x 1-3/4". B. Doors shall be manufactured per Window & Door Manufacturers Association (WDMA) and Architectural Woodwork Standards (AWS). 17 Rev, Memh 2049