Laserfiche WebLink
EXHIBIT B — OUTLINE SPECIFICATIONS <br />DIVISION 2 <br />C. The formaldehyde emission level of all new doors shall not exceed 20 parts per million. <br />D. Glass vision panels in interior doors and sidelights shall be minimum 1/4" clear tempered <br />glass set in metal frame assemblies. Fire protective glass assemblies shall be provided <br />where required by code. <br />E. Fire -rated door and frame assemblies shall be installed where noted in Exhibit "A" or as <br />required by code. Doors and frames shall bear Underwriters Laboratory (UL) label for <br />required fire -resistive rating. <br />F. Doors separating conditioned and non -conditioned space shall have weather stripping to <br />effectively limit air infiltration: Adhesive foam -type or felt weather stripping is not <br />acceptable. <br />G. Where indicated'on`plans, or required by code, a roll -down steel fire shutter bearing a UL <br />3/4 hour, tG label shall be provided. Emergency operation shall be by smoke`detectors <br />with adjus6tife time delay, initially set at 45 seconds. <br />H. Whiteexisting door and frame assemblies are reused, Lessor shall patch, repair, adjust, <br />and refinish the assemblies to provide a new -looking appearance. <br />2.7 DOOR HARDiAiARE <br />A: Lessor shall provide and install door,hardware and related items including keying of <br />locksets necessary,for a complete installation and operation of doors. <br />B. All hardware.shall be CBC/ADA access compliant, heavy-duty commercial quality equal <br />to Schlage,"Van Duprin or Falcon. <br />C. poor hardware shall include (but is not limited to): cylindrical lock and latch sets, door butt <br />hinges, doorstops push plates, door pulls, closers, and exit devices. <br />D. Hinge for exterior outswing doors shall have non -removable pins. ; <br />E. Doorstops shall be provided and installed wherever an opened door or any item of <br />hardware thereon would strike a wall,, column, equipment, or other parts of building <br />construction. Doorstops shall be floor -mounted. <br />F. Lessor shall key all keyed locksets as directed by tenant agency and shall provide a <br />minimum of three keysfor each lock. <br />G. Metal thresholds and weather strips shall be provided to all exterior doors. Thresholds <br />shall have non-sl'ip abrasive finish. <br />H. Adjustable door closers shall be provided on entrance doors, toilet room doors, vestibule <br />doors, doors with access -control hardware, and where shown on plans, and ,required by <br />code. <br />1. Metal kick plates that are-! 0" high shall be provided and installed on the push side of all <br />doors equipped w'fth.door.closers. <br />2.8 MILLWORK <br />A. Lessor shall provide and install new millwork as shown and where indicated in Exhibit `A.- <br />B. All millwork shall be manufactured and installed in accordance with the AWS' latest <br />edition for custom grades. Prior to fabrication, Lessor shall submit to DGS shop drawings <br />of all new millwork. <br />18 <br />Rev. March 2019 <br />E�,�ti <br />