Agenda Packet_2022-05-03 - Laserfiche WebLink

Home Browse Search

0 RFQ For On-Call Demolition Service MACRO-Z-TECHNOLOGY • MMEMEMEEM . . U. I. • Skidsteer with . 1 Superintendent • Sledgehammers • Standard PPE (eye grappler bucket . 2 Operators • Hammers protection, gloves, • End-dump or super- • 4 Laborers • Jack hammers vests, etc.) 10 truck(depending . Subcontractor's • Pry bar • Abatement PPE for on exact access abatement crew • reciprocating saw the abatement crew based on permit& (foreman and 4 T vek suits plan developed after laborers) • Air compressor res respirators) award Chain saws p • Weed eaters • Poly sheeting • 40-yard dumpster . Traffic control devices • 50,000-LB excavator Saws (various types/sizes) (cones, stanchions, • Shovels (various delineators, arrow types/sizes) boards, etc.) • Walk-off matts • SWPPP/BMP materials Table 2. Equipment, crew, tools, and materials/supplies anticipated for the sample project .3 Phase 3: Perform the Work .3.1 Task .1: Abatement • Prior to starting work, we'll provide required notice to the US EPA and CARB • We'll start with removing the bees so that the site is safe for abatement workers. We'll call a local bee keeper to safely remove the hive without damaging the bee population. • A qualified pest control subcontractor will abate vermin, using methods appropriate to the species and locations encountered • Erect asbestos and lead abatement containment (poly sheeting securely duct taped in place with entrance vestibule and negative air pressure maintained inside) • Qualified subcontractor abates the Asbestos Containing Materials (ACM), securely containing ACM inside poly and transporting off-site o • Abatement contractor's license • Map and documentation specifying the ACM abated • Hazardous materials transport/disposal manifests • Completion letter indicating that the property has been abated& is ready for demolition 2. .2 Task 3.2: Salvage & DemolishExterior Site Features • To save time, we perform site salvage & demolition concurrent with interior abatement • Pothole and cap utilities based on coordination efforts during the pre-demolition preparation phase • Salvage opportunities would be evaluated based on the project • Using heavy equipment and hand tools, remove landscaping and trees and mulch if possible, covered patio, and exterior paving • Haul-off operations conducted as needed to maintain site cleanliness 2.3.3 Task . o Salvage & Demolish Building Interior • Salvage opportunities would be evaluated based on the project • Using hand tools, demolish building interior features, including non-load-bearing walls, cabinets, fixtures, drywall, HVAC, electrical, and plumbing. . .4 Task .4a Salvage & Demolish Building Exterior • Safely demolish and remove building structural walls. o Either by deconstruction where we carefully remove structural elements from the top down, or by using heavy equipment to push structural members toward the center of the property.