NS-1416 - Laserfiche WebLink

Home Browse Search

ORDINANCE NO. NS-1416 PAGE FIVE Sec. 8-728. Hidden installations. When any part of a wiring installation is to be hidden from view, the person, firm or corporation installing the wiring shall notify the director of building safety and such parts of the wiring installation shall not be concealed until they have been inspected and approved by the director of building safety. Sec. 8-729. Inspections and corrections. Upon completion of the work which has been autho- rized by issuance of any permit, except an annual permit, it shall be the duty of the person, firm, or corporation installing the same to notify the director of building safety who shall inspect the installation as soon thereafter as practicable. If, upon inspection, the installation is not found to be in con- formity with the provisions of this code, the director of build- ing safety shall notify the person, firm, or corporation making the installation, stating the defects which have been found to exist. All defects shall be corrected within ten (10) days after inspection and notification, or within other reasonable time as permitted by the director of building safety. No electrical installation shall be energized until inspected and approved by the director of building safety. Sec. 8-730. Temporary connections. When authorizing the connection and use of temporary or incomplete work, such authorization shall expire at a time to be stated by the director of building safety. Sec. 8-740. Standards for the installation of electrical equipment. Ail electrical installations;industrial, commercial, and residential, within the governmental jurisdiction covered by this chapter shall be in conformity with the provisions of this article, all applicable State laws, and National Fire Pro- tective Association standards for safety to life and property. Sec. 8-741. Approval of equipment. Ail appliances and equipment shall be listed and labeled by a nationally recognized testing laboratory equal to but not limited to Underwriter's Laboratories, Inc., and approved by the director of building safety. Sec. 8-742. Used materials. Previously used materials shall not be re-used without the written approval obtained in advance from the director of building safety. Sec. 8-743. Nameplates. The maker's nameplate, trademark, or other identifi- cation symbol shall be placed on the outside where it is visible at time of inspection on all electrical materials, devices, appliances, fittings and equipment used or installed under the provisior~of this code.