Laserfiche WebLink
ORDINANCE NO. NS-1794 <br />PAGE EIGHT <br /> <br /> (d) Ail overhead or swinging doors shall be equipped with <br />slidebolts which shall be capable of utilizing padlocks with <br />a minimum nine-thirty-seconds (9/32) inch shackle. <br /> <br /> (1) The entire slidebolt assembly shall be con- <br />structed of case-hardened steel and shall have a frame <br />a minimum of .120 inches in thickness, and a bolt-diameter <br />a minimum of one-half (1/2) inch, and shall protrude at <br />least one and one-half (1-1/2) inches into the receiving <br />guide. <br /> <br /> (2) Slide bolt assemblies shall be attached to the <br />door with bolts which are non-removable from the exterior. <br />Rivets shall not be used to attach such assemblies. <br /> <br /> (e) Padlocks used with exterior mounted slide bolts shall <br />have a hardened steel shackle a minimum of nine-thirty-seconds <br />(9/32) inch in diameter with heel and toe locking and a minimum <br />five (5) pin tumbler operation. The key shall be non-removable <br />when in an unlocked position. <br /> <br /> (f) Doors utilizing a cylinder lock shall have a minimum <br />five (5) pin tumbler operation with the bolt or locking bar <br />extending into the receiving guide a minimum of one inch. <br /> <br /> (g) Pedestrian access doors contained in garage type doors <br />shall comply to the standards set forth in Section 8-211 (b) or <br />(e). <br /> <br />SECTION 6: That Section 8-210 of the Santa Ana Municipal <br />Code is hereby amended to read as follows: <br /> <br /> Sec. 8-210. Special residential building provisions. <br /> <br /> The following special provisions shall apply to all <br />residential dwellings. <br /> <br /> (a) All exterior swinging doors shall be of solid core <br />construction with a minimum thickness of one and three-fOurths <br />(1-3/4) inches, or with panels not less than nine-sixteenths <br />(9/16) inch thick. <br /> <br /> (b) Any swinging door leading from a garage into a resi- <br />dence shall be of solid core construction with a minimum thick- <br />ness of one and three-eights (1-3/8) inches. <br /> <br /> <br />