Laserfiche WebLink
<br />, : ' <br /> <br />shall include the effects of drop cables, interior splits, <br />and any terminal equipment such as descramblers and set-top <br />converters. <br /> <br />A. Carrier- to-No ise 46 dB <br />B. Hum Modulation Less than 2% <br />C. Peak-to-Valley ~ 1 dB <br /> - Any 6 MHz Channel <br /> - 54-400 MHz + 3 dB <br />D. Adjacent Channel 2 dB <br /> <br />(2) Reverse Signals. The reverse channels <br />shall have the capability of providing return signals from <br />any subscriber tap to the extreme end of any area without <br />noticeable signal degradation or interference. <br /> <br />A. The system capability shall include transmission <br />of color video, black and white video, and both low and <br />high speed data, whether analog or digital. <br /> <br />B. If necessary to prevent the build-up of noise and <br />distortion products, the area shall be divided into sections, <br />and sub-trunks run to a central hub within the area. Equiva- <br />lent alternatives such as addressable taps or switches may <br />be utilized. <br /> <br />C. No more than + 54 dBmV output level shall be <br />required out of any customer interface device to meet the <br />system specifications. <br /> <br />D. Where applicable, the end of the system specifications <br />shall include the effects of any signal reprocessing equipment <br />necessary to achieve forward transmission. <br /> <br />E. For Class I signals, the signal delivered to the <br />subscriber's TV receiver, after being transmitted to the <br />headend, processed and retransmitted down a forward channel, <br />shall meet the specifications of (1) above. <br /> <br />5.11 (a) Performance Testing. Grantee shall perform <br />all tests necessary to determine compliance with the technical <br />standards of FCC 76.601. Tests shall include the following, <br />as a minimum: <br /> <br />Pre-Construction <br /> <br />Initial Proof of Performance <br /> <br />-19~ <br />