Laserfiche WebLink
<br />LDVBP <br /> <br />LOV,lnc. <br />180 Industrial Drive <br />Burlington, WI 53/05 <br />800.558.5986 <br />Fax 262.763.0156 <br />www.ldvuso_com <br /> <br />Section Qty. <br /> <br />3.02 <br />3.03 <br />3.04 4 <br />3.05 2 <br />3.06 4 <br />3.07 1 <br />3.08 2 <br />3.09 1 <br />3.10 <br />3.11 <br />3.12, <br />4.00' <br /> <br />I . <br />'23. Custom front wheel cutouts for 10R22.5 tires. <br />24. Rear frame-mounted tow eyes extending past body. <br />25. Aluminum engine box cover with acoustical and thermal insulation. Black molded ABS <br />composite engine box over-lay. <br />.26. Full length skirting. Skirt shall extend 18" down from the bottom of floor extrusions. <br />27. Dash shall be vacuum formed ABS composite with integrated control pod located left of dash. <br />128. All clearance and side marker lights to be LED. <br />29. Standard structural warranty of 5 years or 50,000 miles and standard component warranty of 12 <br />months or 12,000 miles. <br />30. The vehicle shall be fully sanded on all exterior surfaces with no more than 150 grit to assure <br />removal of imperfections in metal surface. All aluminum shall be chemically etched and primed prior <br />to painting. Base body color shall be oven baked and painted with Dupont Imron 5000 to <br />commercial truck standards. <br /> <br />Note: Specifications are from body manufacturer and are subject to change without notice. <br /> <br />32" wide x 82" high 0.125" aluminum sedan door with 21.5" wide x 25.5" high fixed window and mini <br />blind. Door shall have continuous stainless steel piano hinge, two (2) nylon door straps and an <br />aluminum drip__~ail. Located as shown on d~awi~g.. <br />32" wide x 76" high 0.125" aluminum sedan door mounted at floor level with 21.5" wide x 25.5" high <br />fixed window and mini-blind. Door shall have continuous stainless steel piano hinge, two (2) nylon <br />,door straps and an aluminum drip rail. Located as shown on drawing. <br />i Heavy-duty fluted aluminum grab handle with rubber inserts and chrome plated stanchions installed <br />'at exterior entry door location. <br />Heavy-duty fluted aluminum grab handle with rubber inserts and chrome plated stanchions installed <br />inside entry door. <br />Automatic courtesy light at side entry door. <br />Courtesy light defeat switch on dash. <br />Manually operated exterior entrance step. Located as shown on drawing. <br />Swing out stairs mounted on box pan door in body skirt. Includes removable railing that will be <br />stowed behind sedan door. Located as shown on drawing. <br />Whelen 810 Series combination stop/tail, turn and reverse lights, model number 8103RACR (or <br />current model). <br />Entire underside of the apparatus shall be undercoated. Includes chassis, floor extrusions, step <br />wells and aluminum compartments. <br />. Rear mud flaps with anti-sail brackets. <br /> <br />LDV SLIDE-OUT: <br />1. Body shall have two (2) slide-out rooms with approximate dimensions as follows: 72" high x 143" <br />long (max) x 30" deep, forward of rear axle, and 72" high x 100" long x 30" deep, behind rear axle. <br />2. The slide-out room shall be constructed of heavy duty tubular aluminum with welded joints for <br />superior strength. <br />3. The sides of the room shall be sheeted with aluminum sanded and painted to match the exterior. <br />4. When in the closed position the slide-out room shall have a gap of less than .5" around the entire <br />perimeter of the slide-out wall and the exterior side wall. <br />5. The slide-out shail incorporate a full perimeter air seal and dual wiper retainer to wipe debris from <br />the room when sliding in and out. The structure around the air seal shall be reinforced to support <br />the air seal. <br />6. Slide-out seal shall provide a weather tight seal without the use of an awning. <br /> <br />5 <br /> <br />Santa Ana Police Department (eA) MCC30LLC260-03.3 RZ.xls <br /> <br />1/28/2005 <br />