TSCM CORPORATION 4B - 2005 - Laserfiche WebLink

Home Browse Search

1.17 The Contractor will furnish all the equipment, labor, supplies and materials necessary to clean gum, dirt, grime, oil and other fluids from the pavement azeas shown in the Downtown Santa Ana Business Improvement District Area. The project will require power surface cleaning of concrete, pavers and asphalt surfaces. The cleaning activities include simultaneous mechanical removal of materials or pollutants from the surface of the pavement, through application of water under pressure with elevated temperatures used in the cleaning process and the collection of the waste and water. The water is to be filtered to one (1) micron particulate size and shall comply with NPDES requirements. 1.18 This method is to produce measurable results, which will capture and remove at least 95% of the waste pollutants, dirt, and other debris from the pavement surfaces. The Contractor shall be responsible for the disposal of all recovered waste in accordance with all applicable local, state and federal laws and regulations. 1.19 Power wash liquids shall be applied to the surface at minimum water temperature of 250* F. Power wash shall be applied to the various surfaces at an operating pressure of 3500 PSI. 1.20 Cleaning chemicals used in the performance of the work activities shall be within the following OSHA Hazard Standards guidelines: 1. NFPA Hazardous Materials Identification System • Health 1 • Flammability 0 • Reactivity 0 • Contact Hazard 0 2. Reactivity • Stable • No conditions to avoid • No incompatibility • No hazardous decomposition or by-products • No hazardous polymerization 1.21 To comply with the requirements of the City's NPDES permit and the Clean Water Act, contractor shall apply $est Management Practice for all his operations. No discharges will be allowed into the storm drain system or any type drain system. Appropriate cost for circumvention of the storm drain system discharges are assumed incorporated in the bid. Prior to pressure washing Contractor shall block adjacent storm drains with sand bags or booms. Contractor shall collect and properly dispose all waste from the pressure washing.