Laserfiche WebLink
SECTION 16195— ELECTRICAL IDENTIFICATION` <br />PART 1 — GENERAL <br />1.1 SECTION INCLUDES <br />A. Nameplates and labels. <br />B. Wire and cable markers. <br />1.2 REFERENCES <br />A. ANSI /NFPA 70 - National Electrical Code. <br />1.3 SUBMITTALS <br />A. Submit under provisions of Section 01300. <br />B. Product Data: Provide catalog data for nameplates, labels, and markers. <br />1.4 REGULATORY REQUIREMENTS <br />A. Conform to requirements of ANSI /NFPA 70. <br />B. Furnish products listed and classified by Underwriters Laboratories, Inc. as suitable <br />for purpose specified and shown. <br />PART — PRODUCTS <br />2.1 NAMEPLATES AND LABELS <br />A. Nameplates: Engraved three -layer laminated plastic, white letters on black <br />background. Seton Identifications Products or approved equal. <br />B. Locations: <br />1. Each electrical distribution and control equipment enclosure. <br />C. Letter Size: <br />1. Use 1/8 -inch letters for identifying individual equipment and loads. <br />2. Use 1/4 -inch letters for identifying grouped equipment and loads. <br />D. Labels: Embossed adhesive tape, with 3/16 inch white letters on black background. <br />Use only for identification of individual wall switches and receptacles, and control <br />device stations. <br />2.2 WIRE MARKERS <br />City of Santa Ana Electrical Identification <br />Security Management System Project Page 16195 -1 <br />SantaAna_SMS_16195 <br />