25A - TRAFFIC SIGNAL AND STREET LIGHTING

Home Browse Search

^ Video Detection -The system needs to be inspected to ensure normal operation. All detection zones needs to be checked for proper detection and the system needs to be verified that it is capable of applying calls to the controller. Wireless Detection -The City utilizes Sensys Network's Wireless Detection System. The system consists of Sensors, Repeater, Access Point, and Contact Closure Cards. Ensure that the system is fully functional. o Conflict Monitor Certification (yearly task): Once a year, the Contractor shall perform Certification Testing on Conflict Monitors used by the City. The Tester used must be capable of testing Conflict Monitors as defined by NEMA TS1, NEMA TS2, FHWA/CalTrans System 170, and ODOT/TXDOT 2070. The Contractor shall submit the make and model of the Proposed Tester to be used for review by the City. A determination will be made by the City as to whether the Tester is acceptable. o Battery Backup System (If applicable): Some intersections are equipped with battery backup system. For these locations, the Contractor shall test and verify that the system is charged and in working order. o Ancillary Equipment: The Contractor shall check all ancillary equipment (load switches, power supply, flashers, Emergency Vehicle Pre-emption, etc.) in the cabinet for proper operation. • Field Equipment: o The Contractor shall check all pedestrian push buttons for proper operation. o The Contractor shall check all vehicle and pedestrian signal heads for proper operation. o The Contractor shall check all poles and standards for damages. o Contractor shall clean Video Detection camera lens once a year o Contractor shall check and notify the City of any missing or damaged Internally Illuminated Street Name Signs (IISNS), Reflectorized Street Name Signs (RSNS) or traffic signs mounted on the traffic signal poles. o Maintenance of safety lights at traffic signal are done as part of Street Lighting System Maintenance only. 11 25A-14