J&S STRIPING - Laserfiche WebLink

Home Browse Search

i SCOPE OF WORK 1) Provide sign maintenance, repair and installation utilizing City or Contractor provided signs on existing or Contractor-installed posts or poles as specified by City; 2) Provide roadway striping maintenance, repair and installation using paint, thermoplastic, or other material as specified by City; 3) Provide pavement markings installation using paint, thermoplastic, pre- cut thermoplastic, or other material as specified by City; 4) Provide curb marking maintenance, repair and installation using paint or other material as specified by City; and 5) Provide installation of bollards and metal beam guardrails including end pieces and wooden posts and removal and disposal of damaged guardrail as specified by City. 6) Emergency Response a) In case of immediate need to replace certain damaged regulatory signs due to accident or other incidents, where without such a sign could result in immediate hazards to the public andfor property, the Contractor shall provide immediate temporary signs and later replace with permanent signs. b) In case of traffic signal black out, provide temporary STOP signs in all approaches. All work will be on an as needed basis determined by the City. The City will issue work via Department Traffic Orders (DTO's), standard Signing and Striping plans or other work order requests system. The work varies from a simple sign installation to major arterial re-striping. DTO's are Traffic Engineering written work order with signing and striping plan showing the work to be done. The contractor is responsible for cat tracks (marking guide lines for the stripe configuration) and locates sign/curb marking based on information from DTO or Signing and Striping Plan for approval prior to installation. 2.2 TIME FOR COMPLETION OF WORK A. General Response Assigned work, including DTO's, standard Signing and Striping plans or other work order requests, shall be completed within 10 working days of receiving City of Santa Ana Page 9 of 71