J&S STRIPING - Laserfiche WebLink

Home Browse Search

i SCOPE OF WORK authorization. All work on the same DTO shall be done on the same day, unless approved otherwise by the Project Manager or Designee. Larger work assignments (grid work), where the work to be performed may include re-striping and re-painting of all roadway markings within an identified area, shall be completed within 10 to 20 working days, determined by Project Manager or City designee. The contractor shall complete all assigned work in each grid before moving to the next assigned grid. Any deviations from the above shall be preapproved by Project Manager or City Desig nee. B. Emergency Response For damaged signs, the Contractor shall replace the signs within 24 hours. If Underground Service Alert is required, the signs must be replaced within 3 working days. The Contractor shall have adequate number of the following signs in stock at all time for the duration of the contract for emergency response: 1. STOP (R1, 30") 2. NO RT SYMBOL (R17, 24"x24") 3. NO LT SYMBOL (R16, 24"x24°) 4. DO NOT ENTER (R11, 36°x36") 5. ROAD CLOSED (C2, 36"x24") 6. ONE WAY (R10, 48"x16 LT or RT) 2.3 STRIPING TRAFFIC STRIPES AND PAVEMENT MARKINGS This Section shall conform to the CSASPs, the latest CSP and provisions in Section 84 of the CSS and these Special Provisions. A. General All traffic stripes and pavement markings will be traffic paint or Extruded Thermoplastic as called out per individual tasks. All curb markings and median island markings shall be painted using Environmental Protection Agency (EPA) compliant paint material. Paint shall be fast or rapid dry type solvent of similar or approved equal to that manufactured by Ennis or Pervo Paint Companies and shall meet all requirements of South Coast Air Quality Management District. The rate of paint to be applied shall be per recommendation of the paint manufacturer. All pavement markings including legends, arrows, and symbols shall be per CSP Nos. A24A-E. City of Santa Ana Page 10 of 71