Laserfiche WebLink
CITY OF SANTA ANA <br /> <br /> <br /> <br /> <br />workspace(s). <br />2. Workspaces, chairs, files, storage and panel units shall meet ANSI, BIFMA and ADA <br />guidelines and additional requirements where required. <br />3. See furniture plans and typical workstations for workspace configuration. <br /> <br />2.2 Materials <br />A. Final finishes and fabrics will be selected after award of contract. Specifications include price <br />categories/grades of finishes to be used for budgetary purposes. <br />B. Wood Core <br />1. General: Constructed of 45 Lb/Ft3 particleboard that meets or exceeds ANSI A208.1- <br />99/Grade M-2. <br />2. Finish: Decorative laminate on top and equivalent backer sheet on the underside. <br />3. Colors: To be selected from manufactures standard color selections, unless otherwise noted. <br />C. Steel <br />1. General: Fully welded design. <br />2. Finish: Uniform application of epoxy powder coated paint. <br />3. Colors: To be selected from manufacturers standard color selections, unless otherwise noted. <br />D. Extruded Aluminum <br />1. Colors: To be selected from manufactures standard color selections, unless otherwise noted. <br />E. Fabrics <br />1. General: Fabrics to meet or exceed ASTM E-84, Class 1 or A flammability rating and state of <br />California Technical Bulletin 117. <br />2. GreenGuard Certified <br />3. Colors: To be selected from manufacturers standard color selections, unless otherwise noted. <br />F. Solid Surface Material <br />1. Homogeneous solid sheets of filled plastic resin complying with ISSFA-2 <br />G. High Pressure Laminates <br />1. General: Meet or exceed performance standards per ANSI/NEMA. <br />2. Colors: To be selected from manufacturers standard color selections including patterned, solid <br />and woodgrain, unless otherwise noted. <br /> <br />2.3 Fabrication <br />A. Fabricate components, assembled and welded as necessary. <br />B. Fabricate corners and joints without gaps or inaccessible spaces or areas where dirt or moisture <br />could accumulate. <br />C. Fabricate components, drawers, doors, shelves and similar elements of die formed sheet steel. <br />Form each unit rigid, not dependent on building structure or adjacent units for rigidity. <br />D. Form edges and seams smooth. Form material for counter tops, facing, shelves, and similar <br />elements from continuous sheets. <br />E. Cut and drill counter tops, backs, and other components for service fittings and outlets. <br />EXHIBIT 1