Laserfiche WebLink
1 EXHIBIT 1 <br /> CITY OF SANTA ANA <br /> workspace(s). <br /> 2. Workspaces, chairs, files, storage and panel units shall meet ANSI, BIFMA and ADA <br /> guidelines and additional requirements where required. <br /> 3. See furniture plans and typical workstations for workspace configuration. <br /> 2.2 Materials <br /> A. Final finishes and fabrics will be selected after award of contract. Specifications include price <br /> categories/grades of finishes to be used for budgetary purposes. <br /> B. Wood Core <br /> 1. General: Constructed of 45 Lb/Ft3 particleboard that meets or exceeds ANSI A208.1- <br /> 99/Grade M-2. <br /> 2. Finish: Decorative laminate on top and equivalent backer sheet on the underside. <br /> 3. Colors: To be selected from manufactures standard color selections, unless otherwise noted. <br /> C. Steel <br /> 1. General: Fully welded design. <br /> 2. Finish: Uniform application of epoxy powder coated paint. <br /> 3. Colors: To be selected from manufacturers standard color selections, unless otherwise noted. <br /> D. Extruded Aluminum <br /> 1. Colors: To be selected from manufactures standard color selections, unless otherwise noted. <br /> E. Fabrics <br /> 1. General: Fabrics to meet or exceed ASTM E-84, Class 1 or A flammability rating and state of <br /> California Technical Bulletin 117. <br /> 2. GreenGuard Certified <br /> 3. Colors: To be selected from manufacturers standard color selections, unless otherwise noted. <br /> F. Solid Surface Material <br /> 1. Homogeneous solid sheets of filled plastic resin complying with ISSFA-2 <br /> G. High Pressure Laminates <br /> 1. General: Meet or exceed performance standards per ANSI/NEMA. <br /> 2. Colors: To be selected from manufacturers standard color selections including patterned, solid <br /> and woodgrain, unless otherwise noted. <br /> 2.3 Fabrication <br /> A. Fabricate components, assembled and welded as necessary. <br /> B. Fabricate corners and joints without gaps or inaccessible spaces or areas where dirt or moisture <br /> could accumulate. <br /> C. Fabricate components, drawers, doors, shelves and similar elements of die formed sheet steel. <br /> Form each unit rigid, not dependent on building structure or adjacent units for rigidity. <br /> D. Form edges and seams smooth. Form material for counter tops, facing, shelves, and similar <br /> elements from continuous sheets. <br /> E. Cut and drill counter tops, backs, and other components for service fittings and outlets. <br />