MARK THOMAS & COMPANY, INC. (6) - Laserfiche WebLink

Home Browse Search

SCOPE OF SERVICES • Electrical General Sheet (1) • Electrical Stormwater Pump Station Site Plan (1) • Electrical Stormwater Pump Station Power Plan (1) • Electrical Stormwater Pump Station Control Plan (1) • Electrical Stormwater Pump Station Lighting Plan (1) • Electrical Stormwater Pump Station Grounding Plan (1) • Electrical Stormwater Tank Power and Control Plan (1) • Electrical Stormwater Control Building Power Plan (1) • Electrical Stormwater Control Building Control Plan (1) • Electrical Stormwater Control Building Lighting Plan (1) • Electrical Stormwater Control Vault Power and Control Plan (1) • Electrical Stormwater Control Vault Lighting Plan (1) • Electrical Single Line Diagram (1) • Electrical Conduit Schedules (2) • Electrical Pump Control Schematic (1) • Electrical Details (3) • P&IDs (3) • Total sheets: 80 Tetra Tech will rely on geotechnical design parameters provided by Mark Thomas. It is assumed the Pump Station and retention improvements are within properties that will be affected with the Project. Therefore, Tetra Tech will prepare the needed plans for relocation or demolitions and re-establishment (such as irrigation, landscape, electrical services, lighting, gas services, communication, etc.). 7.3.3 Storm Drain Plans Mark Thomas will prepare construction drawings for the Storm Drain Plan relocations for the 35%, 65%, 95%, 100%, and Final submittals. It is assumed that the following is required.- * Plan and Profile sheets (5, 20 scale) Detail sheets (2) Total Sheets: 7 CITY OF SANTA ANA SANTA ANA BOULEVARD GRADE SEPARATION HARK THOHAS 7.4 Water Quality 7.4.1 WQMP Tetra Tech will prepare a WQMP for the project as required for urban runoff from municipal separate storm systems (MS4 Permit). The scope of the WQMP shall include recommendation for post construction permanent best management practices (BMP's), including source control (structural and non-structural) and treatment BMPs. Scope assumes recommendations for BMPs shall be incorporated into the projects PS&E for the design tasks by Mark Thomas. Base project data for SWPPP preparation (areas, slopes, etc.) will be provided. Scope assumes SWPPP will be provided by the construction contractor per the RFP. 7.4.2 Water QualitylBMP Plans Mark Thomas will prepare construction drawings for the Water QualitylBMP Plans for the 35%, 65%, 95%, 100%, and Final submittals. The Layout and details will be included in the Storm Drain Plans and Details as part of task 7.3.3. 7.5 Planting & Irrigation Mark Thomas will prepare Planting and Irrigation plans for the 35%, 65%, 95%, 100%, and Final submittals. a conceptual planting layout plan and a plant palette for City review prior to proceeding with the 65% submittal. The following submittal milestones will incorporate updates based on the City's comments on the conceptual planting layout plan. The planting plans will include a complete plant layout, plant callouts and notes, and quantity sheets. Shrubs will be shown with hatch patterns in the PS&E package. The irrigation layout will be prepared and will include irrigation head and valve locations, valve callouts, and paint -of -connection callouts and notes. Lateral line sizing and notation will be included at the 95% submittal. The irrigation system is assumed to be a new system connecting to the existing water meters. If as -built drawings with sufficient information are not available, planting and irrigation removal and repair areas will be identified with callouts only.