23A - PROJ - MAIN LIBRARY ELEVATOR

Home Browse Search

structural calculations or evaluations for the proposed modifications and submit to the City Building Department for plan check approval, ensuring that all applicable codes are met. These plans and /or shop drawings shall be stamped and signed by a State of California licensed engineer or architect, depending on applicability. Contractor will be responsible for all efforts and coordination required for City approval prior to commencing construction. The proposer shall be responsible for retaining data, records and documentation for the preparation of the required information. These materials shall be made available to the City as requested by the City. All proposed equipment, including software and controls, shall be non - proprietary. The proposed modifications include, but are not limited to, the following: • Provide new non - proprietary microprocessor controller • Provide new PC based machine room monitor • Provide new electronic starter with phase overload protection • Provide new emergency battery lowering unit • Provide new hoist way leveling system and mechanical limit switches • Provide all new wiring including machine room, hatch, car and traveling cables • integrate smoke detector wires into the controller fire recall system and insure proper operation. • Connect the active phone line into the new elevator phone and program to call desired number. • Fixtures: • Provide new Car Operating Panel (COP) in a brushed stainless steel finish, which shall include: — ADA telephone providing hands -free, two -way communication — Emergency light unit — Raised and illuminated pushbuttons with supporting Braille — Certificate frame - -All code required car control key - switches — Fire Phase 2 features in required locked cabinet • Provide new hall pushbutton stations, to be surface mounted at required ADA height, Pushbuttons shall match the COP fixture. Fire Phase I key switch with required engraving will be part of the lower terminal recall fixture, with Access switches located at top and bottom landings as required • Provide new digital car position indicator located in the car operating panel, finished In brushed stainless steel • Provide new traveling lantern with electronic chime • Provide jamb braille as required by ADA code • Door Operation: • Retain existing GAL, closed loop, solid state door operator • Refurbish car door hardware only as necessary, which shall include rollers, linkage, gibs. City of Santa Ana RFP 13 -038 Page B 23A -15