Laserfiche WebLink
2. For each pump monitor the hallowing signals vin Modbus <br />a. Booster PUMP Status - READY <br />h. Rooster Pwnp Trip Alarm. nirth Fault <br />c. Booster Pump Trip Alarm, Motor Overload, <br />d. Boostar Pump Trip Alorm, Phase lass <br />c. Booster Pump Warning, Drive Over Tcnip <br />F, Booster Pump Motor Volts <br />g. booster Pump Motor Pow cr (KWW ) <br />lt. Booster pump ALARM R1 SFT <br />3, Well PI.0 Control Modes: <br />a. Computer Marrtaa] <br />1. Output at RLIN siottil to the well punxp starter when all the following conditions <br />are met: <br />a. Pomp HOA switch is in the AUTO position <br />la, t:ONIPUTER -MANUAL Pump anode is selected at the IIMl <br />c. The drive READY signal is True <br />(1, The Operator selects RUN oat tho 11MI Drop -up window for mantra], pump <br />control. <br />2. Remove the RIJ'N signal to the drive when the drive is running and any of the <br />following conditions arc detected: <br />a. Drive or raiotor FAIJT;T signals is detected <br />h, Drive R IADY signal is removed <br />c, AS TOP cornarm atd is received froua the Opa raator HMI pop-01) win(low. <br />d, The pump Mode is changed From ".MANUAL" <br />1). Well Auto Mode: <br />1. Control thc ptaanp autonitatically On and OCI wheat all the follow ing eonditionS are <br />filet: <br />City WgaM 7a RFP 15 -105 <br />26V *2 <br />